What is the maximum slab thickne...

What is the maximum slab thickness?

What is the maximum thickness of RCC slab? According to Indian standard rcc concrete roof slab thickness in residential building construction is 4 inches (100mm). Use of 5″ to 6″ (125mm to 150mm) is recommended if the concrete will receive occasional heavy loads.

What is 50 micron plastic?

What are 50 micron thickness plastic bags? The thickness of the plastic bags determines its strength, 50 microns is the thickness of the plastic. The thicker the plastic, the higher would be its cost.

Can you mix PP and HDPE?

The DSC and XRD results show that PP and HDPE are not compatible, and the combination of HDPE is not correlated with the crystalline structure and stability of PP.

What is product or line layout?

In manufacturing engineering, a product layout refers to a production system where the work stations and equipment are located along the line of production, as with assembly lines. Usually, work units are moved along line (not necessarily a geometric line, but a set of interconnected work stations) by a conveyor.

How thick is 1000g polythene?

Thickness: 250 Micron (mu) / 1000 Gauge. This thickness is Heavy Duty.

Can a 4 inch wall be load bearing?

Therefore I recommend that all the walls should be at least 9 inch thick. 4.5-inch thick walls are not structurally safe if they are beyond 7 feet in height or carry some imposed load.

How thick is a brick?

The most popular brick size is a Modular brick measuring at 3-5/8" thick by 2-1/4" high and 7-5/8" long.

What is standard wall size?

Average Wall Width of Interior WallsMost interior walls are constructed with 2-by-4 framing, and each 2-by-4 has a nominal width of 3 1/2 inches. Drywall typically covers both sides, and it's usually 1/2 inch thick, which makes the wall 4 1/2 inches thick.

What is runner weight in injection molding?

Runner weight is reduced from 45g to 22g. Smaller runner system results in reduced waste and a smaller equipment size. In summary, Sodick Injection Molding Machines offer extremely fast response time, extreme acceleration, they are capable of minimizing the runner, improve process control, and reduce cycle time.

Which is stronger polyethylene or polyurethane?

-Polyethylene tends to be harder and stronger than polyurethane, making it more suitable to cushion much heavier and/or sharper objects. Its density is 2.2 lb/ft3. -Polyethylene, being the closed cell foam that it is, makes for a foam with a very low water absorption.

low volume injection molding